Title : Operational procedures Motorcycle repair
link : Operational procedures Motorcycle repair
Operational procedures Motorcycle repair
Also Read
Everyone must have a motorized vehicle and every person would want every motorbike goods to be maintained the quality is maintained and maintained. You must often come and check or service your motorbike to keep it well maintained. Motorcycle repair shop that has proven operational standards are bike shop official ones, like Yamaha motorbikes.
Moreover, many motorcycle workshops that provide excellence or adequate facilities so that people who come feel comfortable and at ease if waiting for a long time while still in service motorcycles. But before the motor is in service, it must perform the procedure first. Therefore we will provide an explanation related to operational procedures for motorcycle service in a motorcycle repair shop.
 |
| Yamaha Motorcycle Repair Shop |
Here are the operational procedures when you come to the motorcycle repair shop:
1. Pre workmanship
Before doing the service you must arrange a parking lot for your motorcycle. After that you must take the service serial number to maintain administrative order so that all people who will perform the service must be queued first. After your queue number is stated or your queue turn, it will install a motorcycle protector to maintain service security. After that, register yourself with the recipient and express the complaint of the motorbike to be serviced. After that the reception will invite you to wait in the waiting room while enjoying the facilities that have been provided.
2. The work process
Each mechanic must spell out in accordance with the warrant that has been provided or deposited by the recipient earlier to the mechanic. After the mechanic gets a warrant, the mechanic must prepare the equipment that must be used for the services performed. Once deemed sufficient, the mechanic will begin to work in accordance with the company's operational standards so that it should not be deviated and must be appropriate to avoid mistakes. After doing your motorbike service, the mechanic must do an inspection to see the results. If the motorbike is not inspected, it is feared that when it has left the motorbike repair shop there will be undesirable things such as damage or loss of objects on your motorbike. Then checking the work is very important to support the mechanic's performance. After checking the work then the mechanic must tidy up all the work equipment that has been used before and clean the items that are not used. Because neatness and cleanliness are important things at work.
3. Post-work
After everything that needs to be done, the mechanic must check all the results of his work. Final check needs to get maximum results such as checking tire pressure or checking the tightness of the gas and brake pressure. This adds to the maximization of employee work. And the last is to do a drive test by doing a roadworthy test. This is important because to know the final results before they are given to consumers. After it is deemed sufficient to service the motorbike, the mechanic will give it again to the owner of the motorbike. And you must complete the payment administration that has been used for the service.
Earlier this was a brief explanation of the operational procedures at the motorbike repair shop. So for those of you who want to do motorbike service at a motorbike repair shop, you can read this article and find out what the procedures are in the process. Especially if you do motorcycle service at Yamaha's motorbike repair shop. You will get adequate facilities from friendly service from the recipient of the consumer as well as the quality of the mechanic's performance. Hopefully the explanation can be useful.
Thus the article Operational procedures Motorcycle repair
You are now reading the article Operational procedures Motorcycle repair with the link address https://scemingb.blogspot.com/2019/10/operational-procedures-motorcycle-repair.html